Located in Piangil, Northern Victoria, Andrew Peace Wines is a third-generation family business with a rich 40-year history. Situated over 400 kilometres inland, the region experiences a [...]
Thermal conductivity Thermal conductivity is a physical property that describes how well a material can conduct heat. It’s the rate at which heat energy is conducted through a unit [...]
The purpose of insulating a stainless-steel tank is to provide thermal protection and temperature control for the contents inside the tank. This is a common requirement for many industries [...]
Lateral loads are horizontal forces acting on a structure; that is, they are applied parallel to the ground. The most common types of lateral load are wind load and seismic load. A&G design [...]
Corrosion is the degradation of a material as a result of its interaction with its surroundings and usually results in converting a refined metal into a more chemically stable oxide with a loss [...]
An oversize load refers to the movement of a large load that requires a vehicle that is wider, heavier, higher, or longer than a standard road vehicle, and is subject to specific regulations. [...]
A pressure vessel is a container designed to hold gases or liquids at a pressure that is substantially different from ambient pressure. Pressure vessels can be dangerous and pressure vessel [...]
A pressure vessel is a closed container designed to hold gases or liquids at a pressure that is substantially different from the ambient pressure. Types of pressure vessels vary according to [...]
Different types of welding processes In this series, we look at the different types of welding processes used by A&G Engineering in its fabrication processes. Plasma Arc Welding [...]
Different types of welding processes In this series, we look at the different types of welding processes used by A&G Engineering in its fabrication processes. Metal Inert Gas (MIG) Welding [...]